Horizon Inc.

Sprinkler hangers are basically used to support the pipes that are hanging from the roofs. Saketh Exim’s sprinkler hanger provides the solution for hanging variety of pipes like thin-wall steel pipes, threaded tubes, copper pipes, plastic pipes, etc. Our sprinkler hangers support the structure of the pipes in a safe and reliable manner.

APPLICATION: A SPRINKLER HANGER recommended to provide vertical support to non insulated piping systems. By adjusting the position of the sprinkler nut on the hanger rod at the top of the hanger, pipe elevation can be altered.

CONSTRUCTION: A SPRINKLER HANGER consists of a piece of carbon steel shaped to support pipe. Gives Double thickness at the support. Most suitable for fire extinguishing pipes installation. 

APPROVALS: Underwriter's Laboratories (UL) Factory Mutual Approved (FM) Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58 (Type10) Federal Specification WW-H-171E & A-A-1192A (Type 10)

PIPE HANGER WITH EPDM LINING is recommended for non-insulated stationary pipelines in a horizontal position. It can be use for supporting pipes along roof.

APPLICATION: PIPE HANGER WITH EPDM LINING is recommended for non-insulated stationary pipelines in a horizontal position. It can be use for supporting pipes along roof.

CONSTRUCTION: PIPE HANGER with EPDM lining consists of piece carbon steel shaped to wrap around the pipe, made from shaped carbon steel plate. The selection of the proper PIPE HANGER WITH EPDM LINING depends upon the temperature of the piping system and load to be carried. Permits installation before and after pipe is in place. Reduces noise upto 18 dB. 

APPROVALS: Underwriter's Laboratories Listed (UL) Factory Mutual (FM) Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58 (Type 12) Federal Specification WW-H-171E & A-A-1192A (Type25)

Horizon Inc. is a Wholesaler and Trader of high quality Self Drilling Screw, Chipboard Screw, Self Tapping Screws, Blind Rivet and much more.

Riser hanger is mechanical hardware used for supporting pipes in case of vertical running of pipes to rest them on a floor or structure. The hardware is placed around the pipe and the fasteners are tightened to clamp them perfectly onto the pipe. We are a leading rise hanger manufacturer that manufacture an array of pipe supports and other steel products that are used in various industrial applications.

APPLICATION: RISER CLAMPS are recommended for the support and/or restraint of vertical steel pipes. A RISER CLAMP is designed to attach to the pipe and to rest on a structural member or floor; it is not designed to have hanger rods attached to it to support the pipe.

CONSTRUCTION: RISER CLAMPS consists of two carbon steel flat bars bent to shape and held together by two bolts. Designed to act as a rigid support or guide for vertical pipes. The clamp should be bolted to the pipe just below support lugs or other attachments that can carry a shear load. 

APPROVALS: Underwriters Laboratories (UL) Factory Mutual (FM) Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58 (Type 8) Federal Specification WW-H-171E & A-A-1192A (Type 8)

APPLICATION: Recommended for supporting a piping system of heavy weight with fittings vertically or horizontally to walls or ceilings. It can be used to mount electrical & insulated pipes, corner locking and better gripping of electrical conduits.

CONSTRUCTION: A HEAVY SADDLE consists of piece of steel shaped to the proper configuration as shown in the diagram.